How do you remove and install the Fuel Level Sensor and Fuel Pump on Hyundai Santa Fe?

To remove the rear seat, cut the carpet and padding below it to access the fuel tank. Remove the fuel pump/fuel level sensor floor service hole cover and disconnect the wiring. Relieve the fuel system pressure and disconnect the fuel lines. Remove the retaining bolts and carefully lift the fuel pump/fuel level sensor assembly from the fuel tank. Inspect and clean the fuel pump inlet strainer if necessary. Installation is the reverse of removal.

How do you replace the fuel pump/fuel level sending unit assembly in a fuel tank on Hyundai Santa Fe?

After removing the fuel pump/fuel level sensor from the tank, you can replace the entire assembly or individual parts. Drain residual gasoline and place it on a clean, well-ventilated workbench. Check the strainer for clogging and replace if necessary. Unclip the fuel pump from the assembly. Reassemble in reverse order and reinstall in the fuel tank.

How to check the fuel pump and fuel pressure on Hyundai Santa Fe?

Check the fuel tank and fuel pump, listening for a whirring noise when the ignition is on. If silent, inspect the EFI fuse, circuit, relay, and fuel pump cut switch. If these are fine, examine the fuel pump wiring. Test fuel pressure by connecting a fuel pressure gauge between the fuel supply line and fuel rail. For return-type systems, check fuel pump operation and pressure with ignition on. If pressure is high, inspect the vacuum and fuel return hoses. If low, pinch the fuel return hose and replace the regulator if pressure increases. Disconnect the vacuum hose to check regulator operation. For returnless systems, measure fuel pressure while the engine is idling. If pressure is low, check the fuel supply hose and line, replace the fuel filter or fuel pump/regulator. If high, replace the fuel pump/regulator and diagnose the fuel system. After testing, relieve pressure, disconnect the battery cable, remove the gauge, reconnect the battery, and check for leaks.

Genuine Hyundai Santa Fe Fuel Pump

Gas Pump

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Fuel Pumps found

View related parts
Hyundai Santa Fe Pump Assembly-Fuel
Part Number: 35320-3C210
$486.02 MSRP: $688.84
You Save: $202.82 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fuel Pump, Pump
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2013-2015 Hyundai Santa Fe | DOHC - GDI | Wagon - Long 5Door 6P, Wagon - Long 5Door 7P
View related parts
Hyundai Santa Fe Pump Assembly-Fuel
Part Number: 31111-C2500
$330.11 MSRP: $463.79
You Save: $133.68 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fuel Pump, Pump
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2019-2023 Hyundai Santa Fe | DOHC - GDI, DOHC - TCI/GDI | Wagon - 5Door 5P
View related parts
Hyundai Santa Fe Pump-Fuel
Part Number: 31111-25000
$309.04 MSRP: $426.76
You Save: $117.72 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2000-2006 Hyundai Santa Fe | High Grade, Middle Grade | 5 Door Wagon
View related parts
Hyundai Santa Fe Pump Assembly-Fuel
Part Number: 31111-2W750
$228.90 MSRP: $321.60
You Save: $92.70 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fuel Pump
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2013-2018 Hyundai Santa Fe | DOHC - GDI | Wagon - Long 5Door 6P, Wagon - Long 5Door 7P
View related parts
Hyundai Santa Fe Fuel Pump & Tube Assembly
Part Number: 31119-L1100
$154.18 MSRP: $216.61
You Save: $62.43 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fuel Pump
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2021-2023 Hyundai Santa Fe | DOHC - TCI/GDI | Wagon - 5Door 5P
View related parts
Hyundai Santa Fe FUEL PUMP & TUBE ASSY
Part Number: 31119-C5000
$221.66 MSRP: $306.10
You Save: $84.44 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2019-2020 Hyundai Santa Fe | DOHC - GDI, DOHC - TCI/GDI | Wagon - 5Door 5P
View related parts
Hyundai Santa Fe Pump-Fuel
Part Number: 31111-J4100
$285.23 MSRP: $400.74
You Save: $115.51 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fuel Pump, Pump
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2021-2023 Hyundai Santa Fe | DOHC - GDI | Wagon - 5Door 5P
View related parts
Hyundai Santa Fe FUEL PUMP & TUBE ASSY
Part Number: 31119-L1400
$173.46 MSRP: $243.71
You Save: $70.25 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fuel Pump
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2021-2023 Hyundai Santa Fe | DOHC - GDI | Wagon - 5Door 5P

Hyundai Santa Fe Fuel Pump

Hyundai Santa Fe Fuel Pump is one of the components that play critical roles of pumping the fuel from the tank to the carburetor or the injection system. EF pumps are usually incorporated in the fuel injection process and are normally installed within the fuel tank. Carbureted engines are equipped with Mechanical fuel pumps that are driven by camshaft and these will pump the fuel to float bowl. Where the engine does not crank, it will always be relevant to check the fuel pump voltage and its operation. Performance fuel pumps vary in the quantity the engine requires, and mechanical pumps can go up to 130 GPH. Mechanical pumps are generally good for carburetion while electric pumps are commonly used for nowadays high-pressure fuel injection feature.

If you are looking for affordable high-quality OEM Hyundai Santa Fe Fuel Pump, then you have come to the prime place. Our website provides a large amount of genuine Hyundai Santa Fe Fuel Pump at unbeatable prices. All our parts come backed with the manufacturer's warranty.

Hyundai Santa Fe Fuel Pump Parts Questions & Experts Answers

Pump-Fuel
31111-25000
Q: How do you remove and install the Fuel Level Sensor and Fuel Pump on Hyundai Santa Fe?
A: To remove the rear seat, cut the carpet and padding below it to access the Fuel Tank. Remove the fuel pump/fuel level sensor floor service hole cover and disconnect the wiring. Relieve the fuel system pressure and disconnect the fuel lines. Remove the retaining bolts and carefully lift the fuel pump/fuel level sensor assembly from the fuel tank. Inspect and clean the fuel pump inlet strainer if necessary. Installation is the reverse of removal.
Pump-Fuel
31111-25000
Q: How do you replace the fuel pump/fuel level sending unit assembly in a fuel tank on Hyundai Santa Fe?
A: After removing the fuel pump/fuel level sensor from the tank, you can replace the entire assembly or individual parts. Drain residual gasoline and place it on a clean, well-ventilated workbench. Check the strainer for clogging and replace if necessary. Unclip the fuel pump from the assembly. Reassemble in reverse order and reinstall in the fuel tank.
Pump-Fuel
31111-25000
Q: How to check the fuel pump and fuel pressure on Hyundai Santa Fe?
A: Check the Fuel Tank and fuel pump, listening for a whirring noise when the ignition is on. If silent, inspect the EFI fuse, circuit, relay, and fuel pump cut switch. If these are fine, examine the fuel pump wiring. Test fuel pressure by connecting a fuel pressure gauge between the fuel supply line and Fuel Rail. For return-type systems, check fuel pump operation and pressure with ignition on. If pressure is high, inspect the vacuum and fuel return hoses. If low, pinch the fuel return hose and replace the regulator if pressure increases. Disconnect the vacuum hose to check regulator operation. For returnless systems, measure fuel pressure while the engine is idling. If pressure is low, check the fuel supply hose and line, replace the fuel filter or fuel pump/regulator. If high, replace the fuel pump/regulator and diagnose the fuel system. After testing, relieve pressure, disconnect the battery cable, remove the gauge, reconnect the battery, and check for leaks.

Related Hyundai Santa Fe Parts

Browse by Year

2023 Fuel Pump 2022 Fuel Pump 2021 Fuel Pump 2020 Fuel Pump 2019 Fuel Pump 2018 Fuel Pump 2017 Fuel Pump 2016 Fuel Pump 2015 Fuel Pump 2014 Fuel Pump 2013 Fuel Pump 2006 Fuel Pump 2005 Fuel Pump 2004 Fuel Pump 2003 Fuel Pump 2002 Fuel Pump 2001 Fuel Pump 2000 Fuel Pump