What is the removal and installation procedure for steering gear on Hyundai Accent?

To eliminate a 1986 through 2005 model, start by raising the front of the vehicle, putting it securely on jackstands, and applying the parking brake. Power steering pressure and return lines are removed, marked to maintain their relationship, and capped to prevent fluid loss. The lower intermediate shaft pinch bolt is taken out, tie-rod ends are separated from the steering knuckle arms, and rack and pinion housing clamp bolts are removed. As well as this, take off the longitudinal crossmember in 1995 through 2005 models, then lower the rack and pinion, separate the intermediate shaft from the rack and pinion input shaft, and remove the rack and pinion from the vehicle. Now to install involves raising the rack and pinion, connecting the intermediate shaft, and installing gear housing clamps and bolts. Reconnect tie rod ends; install intermediate shaft lower pinch bolt; connect power steering pressure line fitting bolt; attach return hose; fill power-steering pump reservoir; bleed system. Then in the case of 2006 and later models, loosen front wheel lug nuts, then raise it onto jackstands after removing front wheels. And finally, disengage stabilizer bar links as well as tie rod ends, followed by detaching control arm ball joints from steering knuckles. Underneath the engine compartment, remove the engine under-cover, followed by disconnecting the power steering fluid return hose, drained then capped under it. Remove the power steering pressure line fitting bolt, next detach the universal joint between steering column shafts and pinion gears of the rack and pinion itself. For example, unbolt heat protectors or withdraw exhaust rubber hangers before taking through-bolts that link front mounts with rear ones away-thus lowering the subframe while supporting it at the same time. Additionally, remove rear engine mounting bracket bolts, undoing brackets themselves from the subframe of the car body part that holds these components together better than other types do for stability during operation due mainly to its weight distribution being towards the middle rather than at the ends. Disconnect power-steering pump pressurized hoses and remove them; for the 2012 models onwards, unplug the power assist motor's electrical connector at the rack and pinion side too. Undo rack and pinion mounting bolts and take it out. Installation is in reverse order of removal with refilling and bleeding required in power-steering systems.

Genuine Hyundai Accent Rack And Pinion

Steering Rack And Pinion

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

39 Rack And Pinions found

View related parts
Hyundai Accent Gear Assembly-Steering
Part Number: 56500-1R101
$860.16 MSRP: $1229.92
You Save: $369.76 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear Assembly, Steering Gear
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2011-2017 Hyundai Accent | DOHC - GDI | Sedan - 4Door 5P, Sedan - 5Door 5P
View related parts
Hyundai Accent Gear Assembly-Steering
Part Number: 56500-1R100
$860.16 MSRP: $1229.92
You Save: $369.76 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear Assembly, Steering Gear
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2011-2014 Hyundai Accent | DOHC - GDI | Sedan - 4Door 5P, Sedan - 5Door 5P
View related parts
Hyundai Accent Gear Assembly-Steering
Part Number: 56500-H8000
$858.62 MSRP: $1227.73
You Save: $369.11 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear Assembly, Steering Gear
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2018-2022 Hyundai Accent | DOHC - GDI, DOHC - MPI | Sedan - 4Door 5P
View related parts
Hyundai Accent Gear & Linkage Assembly-Power Steering
Part Number: 57700-1E100
$689.04 MSRP: $985.24
You Save: $296.20 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear Assembly
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2005-2011 Hyundai Accent | Middle Grade | DOHC - MPI | 3 Door Sedan, 4 Door Sedan, Sedan - 3Door 5P, Sedan - 4Door 5P
View related parts
Hyundai Accent Gear & Linkage Assembly-Power Steering
Part Number: 57710-25010
$950.90 MSRP: $1359.68
You Save: $408.78 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear Assembly, Steering Gear
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 1999-2006 Hyundai Accent | Low Grade, Middle Grade | 3 Door Sedan, 4 Door Sedan
View related parts
Hyundai Accent Gear & Linkage Assembly-Power Steering
Part Number: 57710-25510
$807.48 MSRP: $1127.61
You Save: $320.13 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaces: 57710-25500
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 1999-2006 Hyundai Accent | Low Grade, Middle Grade | 3 Door Sedan, 4 Door Sedan
View related parts
Hyundai Accent Gear & Linkage Assembly-Power Steering
Part Number: 57700-1E000
$657.66 MSRP: $932.11
You Save: $274.45 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear Assembly, Steering Gear
- Replaces: 57700-1E050
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2005-2011 Hyundai Accent | High Grade, Middle Grade | DOHC - MPI | 3 Door Sedan, 4 Door Sedan, Sedan - 3Door 5P, Sedan - 4Door 5P
View related parts
Hyundai Accent Gear & Linkage Assembly-Power Steering
Part Number: 57700-1E050
$669.22 MSRP: $932.11
You Save: $262.89 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaced by: 57700-1E000
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2005-2011 Hyundai Accent | High Grade | DOHC - MPI | 3 Door Sedan, Sedan - 3Door 5P, Sedan - 4Door 5P
View related parts
Hyundai Accent Gear Assembly-Steering
Part Number: 56510-25011
$929.79 MSRP: $1329.48
You Save: $399.69 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear Assembly, Steering Gear
- Replaces: 56510-25000, 56510-25001
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 1999-2006 Hyundai Accent | Low Grade, Middle Grade | 3 Door Sedan, 4 Door Sedan
View related parts
Hyundai Accent Rack Assembly-Power Steering Gear Box
Part Number: 57710-1E000
$211.29 MSRP: $296.85
You Save: $85.56 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Rack
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2005-2011 Hyundai Accent | High Grade, Middle Grade | DOHC - MPI | 3 Door Sedan, 4 Door Sedan, Sedan - 3Door 5P, Sedan - 4Door 5P
View related parts
Hyundai Accent Reman Gear Assembly Power Steering
Part Number: 57710-25000-RM
$60.69 MSRP: $83.31
You Save: $22.62 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: [Reman] Gear & Linkage Assembly
- Replaced by: 57710-25010-RM
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 1999-2006 Hyundai Accent | Low Grade, Middle Grade | 3 Door Sedan, 4 Door Sedan
View related parts
Hyundai Accent Rack Assembly-Power Steering Gear Box
Part Number: 57720-22000
$165.38 MSRP: $227.02
You Save: $61.64 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaced by: 57720-25010
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 1994-2006 Hyundai Accent | High Grade, Low Grade, Middle Grade | 3 Door, 3 Door Sedan, 4 Door, 4 Door Sedan
View related parts
Hyundai Accent Rack-Steering Gear Box
Part Number: 56531-22000
$197.46 MSRP: $272.68
You Save: $75.22 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaced by: 56531-25010
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 1994-1999 Hyundai Accent | High Grade, Low Grade, Middle Grade | 3 Door, 4 Door
View related parts
Hyundai Accent Rack-Steering Gear Box
Part Number: 56531-25000
$197.46 MSRP: $272.68
You Save: $75.22 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 1999-2006 Hyundai Accent | Low Grade, Middle Grade | 3 Door Sedan, 4 Door Sedan
View related parts
Hyundai Accent Rack-Steering Gear Box
Part Number: 56531-25010
$194.08 MSRP: $272.68
You Save: $78.60 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Rack
- Replaces: 56531-25000, 56531-22000
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 1994-2006 Hyundai Accent | High Grade, Low Grade, Middle Grade | 3 Door, 3 Door Sedan, 4 Door, 4 Door Sedan
View related parts
Hyundai Accent Reman Gear & Linkage Assembly
Part Number: 57710-25510-RM
$200.66 MSRP: $274.19
You Save: $73.53 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: [Reman] Gear & Linkage Assembly
- Replaces: 57710-25500-RM
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 1999-2006 Hyundai Accent | Low Grade, Middle Grade | 3 Door Sedan, 4 Door Sedan
View related parts
Hyundai Accent Gear Assembly-Steering
Part Number: 56500-1E000
$715.81 MSRP: $999.60
You Save: $283.79 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2006-2011 Hyundai Accent | DOHC - MPI | Sedan - 3Door 5P, Sedan - 4Door 5P
View related parts
Hyundai Accent Gear & Linkage Assembly-Power Steering
Part Number: 57710-25500
$807.48 MSRP: $1127.61
You Save: $320.13 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaced by: 57710-25510
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 1999-2006 Hyundai Accent | Middle Grade | 3 Door Sedan, 4 Door Sedan
View related parts
Hyundai Accent Gear & Linkage Assembly-Power Steering
Part Number: 57710-25000
$864.74 MSRP: $1207.57
You Save: $342.83 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 1999-2006 Hyundai Accent | Low Grade, Middle Grade | 3 Door Sedan, 4 Door Sedan
View related parts
Hyundai Accent Gear Assembly-Steering
Part Number: 56510-25000
$952.04 MSRP: $1329.48
You Save: $377.44 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaced by: 56510-25011
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 1999-2006 Hyundai Accent | Low Grade, Middle Grade | 3 Door Sedan, 4 Door Sedan

| Page 1 of 2 |Next >

1-20 of 39 Results

Hyundai Accent Rack And Pinion

If you are looking for affordable high-quality OEM Hyundai Accent Rack And Pinion, then you have come to the prime place. Our website provides a large amount of genuine Hyundai Accent Rack And Pinion at unbeatable prices. All our parts come backed with the manufacturer's warranty.

Hyundai Accent Rack And Pinion Parts Questions & Experts Answers

Gear Assembly-Steering
56500-1R101
Q: What is the removal and installation procedure for steering gear on Hyundai Accent?
A: To eliminate a 1986 through 2005 model, start by raising the front of the vehicle, putting it securely on jackstands, and applying the parking brake. Power steering pressure and return lines are removed, marked to maintain their relationship, and capped to prevent fluid loss. The lower intermediate shaft pinch bolt is taken out, tie-rod ends are separated from the steering knuckle arms, and rack and pinion housing clamp bolts are removed. As well as this, take off the longitudinal crossmember in 1995 through 2005 models, then lower the rack and pinion, separate the intermediate shaft from the rack and pinion input shaft, and remove the rack and pinion from the vehicle. Now to install involves raising the rack and pinion, connecting the intermediate shaft, and installing gear housing clamps and bolts. Reconnect Tie Rod Ends; install intermediate shaft lower pinch bolt; connect power steering pressure line fitting bolt; attach return hose; fill power-steering pump reservoir; bleed system. Then in the case of 2006 and later models, loosen front wheel lug nuts, then raise it onto jackstands after removing front wheels. And finally, disengage stabilizer bar links as well as tie rod ends, followed by detaching control arm Ball Joints from steering knuckles. Underneath the engine compartment, remove the engine under-cover, followed by disconnecting the power steering fluid return hose, drained then capped under it. Remove the power steering pressure line fitting bolt, next detach the universal joint between steering column shafts and pinion gears of the rack and pinion itself. For example, unbolt heat protectors or withdraw exhaust rubber hangers before taking through-bolts that link front mounts with rear ones away-thus lowering the subframe while supporting it at the same time. Additionally, remove rear engine mounting bracket bolts, undoing brackets themselves from the subframe of the car body part that holds these components together better than other types do for stability during operation due mainly to its weight distribution being towards the middle rather than at the ends. Disconnect power-steering pump pressurized hoses and remove them; for the 2012 models onwards, unplug the power assist motor's electrical connector at the rack and pinion side too. Undo rack and pinion mounting bolts and take it out. Installation is in reverse order of removal with refilling and bleeding required in power-steering systems.