How do you replace the Hazard Warning Switch on Hyundai Santa Fe?

Disconnect the cable from the negative battery terminal. Carefully pry the switch panel out of the instrument panel using a suitable trim panel tool, as the instrument dimmer control and traction control switch are located in a panel that can be easily removed from the driver's knee bolster. To replace the switches, disconnect the electrical connector and remove the switch from the panel, with installation being the reverse of removal. For the hazard warning light, fog light, and rear window defogger switches, remove the lower center trim panel. For 2009 and earlier models, take out the two screws from the bottom of the upper trim panel, which secures the bottom of the center trim panel, and use a trim tool to pry the upper panel off by releasing the clips. For 2010 and later models, remove the center trim and center audio/navigation trim panel. Disconnect the wiring from the switches and remove the assembly, ensuring to mark the identical electrical connectors of the fog light and defogger switches to avoid confusion. Remove the individual switches as necessary, with installation being the reverse of removal.

Genuine Hyundai Santa Fe Hazard Warning Switch

Hazard Warning Emergency Light Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Hazard Warning Switches found

View related parts
Hyundai Santa Fe Switch Assembly-Hazard
Part Number: 93790-2B001-CA
$43.97 MSRP: $61.24
You Save: $17.27 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hazard Switch
- Manufacturer Note: INT;J4;J9
- Replaces: 93790-2B001-WK
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2006-2012 Hyundai Santa Fe | High Grade, Middle Grade | DOHC - MPI | 5 Door Wagon, Wagon - 5Door 5P, Wagon - 5Door 7P
View related parts
Hyundai Santa Fe Switch Assembly-Hazard
Part Number: 93790-2B001-WK
$45.49 MSRP: $61.24
You Save: $15.75 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Manufacturer Note: INT;J4;J9;WK
- Replaced by: 93790-2B001-CA
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2006-2009 Hyundai Santa Fe | High Grade, Middle Grade | DOHC - MPI | 5 Door Wagon, Wagon - 5Door 5P, Wagon - 5Door 7P
View related parts
Hyundai Santa Fe Switch Assembly-Hazard
Part Number: 93790-26000
$34.72 MSRP: $48.35
You Save: $13.63 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hazard Switch
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2000-2006 Hyundai Santa Fe | High Grade, Middle Grade | 5 Door Wagon
View related parts
Hyundai Santa Fe Switch Assembly-Hazard
Part Number: 93790-2B101-WK
$42.66 MSRP: $59.42
You Save: $16.76 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hazard Switch
- Manufacturer Note: INT;J4;J9;WK
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2006-2009 Hyundai Santa Fe | High Grade, Middle Grade | DOHC - MPI | 5 Door Wagon, 5 Door Wagon 7, Wagon - 5Door 5P, Wagon - 5Door 7P
View related parts
Hyundai Santa Fe Switch Assembly-Hazard Warning Lam
Part Number: 93790-26500
$43.97 MSRP: $61.24
You Save: $17.27 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly-Hazard Warning Lamp; Hazard Switch
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2000-2006 Hyundai Santa Fe | High Grade, Middle Grade | 5 Door Wagon
View related parts
Hyundai Santa Fe Switch Assembly-Hazard Warning Lam
Part Number: 93790-26600
$45.49 MSRP: $61.24
You Save: $15.75 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly-Hazard Warning Lamp
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2000-2006 Hyundai Santa Fe | High Grade, Middle Grade | 5 Door Wagon
View related parts
Hyundai Santa Fe Switch Assembly-Hazard
Part Number: 93790-S1000
$40.38 MSRP: $56.24
You Save: $15.86 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hazard Switch
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2019-2023 Hyundai Santa Fe | DOHC - GDI, DOHC - TCI/GDI | Wagon - 5Door 5P
View related parts
Hyundai Santa Fe Switch Assembly-Hazard
Part Number: 93790-2B101-CA
Product Specifications
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2009-2010 Hyundai Santa Fe | DOHC - MPI | Wagon - 5Door 5P

Hyundai Santa Fe Hazard Warning Switch

If you are looking for affordable high-quality OEM Hyundai Santa Fe Hazard Warning Switch, then you have come to the prime place. Our website provides a large amount of genuine Hyundai Santa Fe Hazard Warning Switch at unbeatable prices. All our parts come backed with the manufacturer's warranty.

Hyundai Santa Fe Hazard Warning Switch Parts Questions & Experts Answers

Switch Assembly-Hazard
93790-2B001-CA
Q: How do you replace the Hazard Warning Switch on Hyundai Santa Fe?
A: Disconnect the cable from the negative battery terminal. Carefully pry the switch panel out of the instrument panel using a suitable trim panel tool, as the instrument dimmer control and traction control switch are located in a panel that can be easily removed from the driver's knee bolster. To replace the switches, disconnect the electrical connector and remove the switch from the panel, with installation being the reverse of removal. For the hazard warning light, fog light, and rear window defogger switches, remove the lower center trim panel. For 2009 and earlier models, take out the two screws from the bottom of the upper trim panel, which secures the bottom of the center trim panel, and use a trim tool to pry the upper panel off by releasing the clips. For 2010 and later models, remove the center trim and center audio/navigation trim panel. Disconnect the wiring from the switches and remove the assembly, ensuring to mark the identical electrical connectors of the fog light and defogger switches to avoid confusion. Remove the individual switches as necessary, with installation being the reverse of removal.