How to remove and install the door latch, lock cylinder, inside handle, and outside door handle on Hyundai Accent?

First, strip the area by pulling the door trim panel and watershield, then the door window glass; then for Sierra 2006 and later, the rear channel. Then, it became physically possible to reach inside the door in some models to disconnect the door safety and the inside handle through the door service hole with the latch; if it was physically impossible with the latch on the later models, first, disconnect the rods connected to the inside handle mechanism, although the inside handle latch will be easily accessed later. Subsequently, unbolt the Door latch Retaining screws and pull out the Door latch, and the process of installation is the opposite of the process of detachment. For the lock cylinder, this is located on the outside door handle for the 1995 and later models, the lock cylinder rod should be pulled from its connection, and the retaining clip on the lock cylinder can be removed by using the pliers. As earlier expounded installation progresses in a polarity manner which is in this case the vice versa. Continuing with the interior handle, unscrew its retaining bolts and simply taking the handle out; the rods or cables that connect the handle mechanism must be disconnected although turning the handle assembly or the end of the cable 90 degrees may be required. Before tightening the screws, the handle assembly position should have the correct stroke travel when reinstalling. For the outside door handle you must first remove the lock rod and outside handle rod, then you will have to take out the screws in the nut and then you will have to slide the handle base and separate it. In addition to that, installation is done in a backward fashion.

Genuine Hyundai Accent Door Lock Cylinder

Door Lock Cylinder Tumbler

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

67 Door Lock Cylinders found

View related parts
Hyundai Accent Door Key Sub Set,Left
Part Number: 81970-1RA00
$92.66 MSRP: $130.18
You Save: $37.52 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Key Sub Set-Door,Lh; Cylinder & Keys, Lock Cylinder
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2011-2017 Hyundai Accent | DOHC - GDI | Sedan - 4Door 5P, Sedan - 5Door 5P
View related parts
Hyundai Accent Front Door Lock Assembly,Left
Part Number: 81970-1EA00
$37.91 MSRP: $52.81
You Save: $14.90 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assembly-Front Door,Lh; Lock Cylinder, Lock Cylinder Assembly
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2005-2011 Hyundai Accent | High Grade, Middle Grade | DOHC - MPI | 3 Door Sedan, 4 Door Sedan, Sedan - 3Door 5P, Sedan - 4Door 5P
View related parts
Hyundai Accent Door Lock Assembly,Left
Part Number: 81970-25A00
$82.41 MSRP: $115.79
You Save: $33.38 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assembly-Door,Lh; Cylinder & Keys, Lock Cylinder
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 1999-2006 Hyundai Accent | Low Grade, Middle Grade | 3 Door Sedan, 4 Door Sedan
View related parts
Hyundai Accent Door Lock Assembly,Left
Part Number: 81970-22A00
$68.81 MSRP: $96.68
You Save: $27.87 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assembly-Door,Lh; Cylinder & Keys, Lock Cylinder
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 1994-1999 Hyundai Accent | High Grade, Low Grade, Middle Grade | 3 Door, 4 Door
View related parts
Hyundai Accent Front Door Lock Assembly,Right
Part Number: 81980-1EA00
$31.67 MSRP: $44.11
You Save: $12.44 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assembly-Front Door,Rh; Lock Cylinder, Lock Cylinder Assembly
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2005-2011 Hyundai Accent | High Grade, Middle Grade | DOHC - MPI | 3 Door Sedan, 4 Door Sedan, Sedan - 3Door 5P, Sedan - 4Door 5P
View related parts
Hyundai Accent Door Key Sub Set,Left
Part Number: 81970-1RB01
$111.17 MSRP: $156.19
You Save: $45.02 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Key Sub Set-Door,Lh; Lock Cylinder
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2011-2017 Hyundai Accent | DOHC - GDI | Sedan - 4Door 5P, Sedan - 5Door 5P
View related parts
Hyundai Accent Lock Key & Cylinder Set
Part Number: 81905-J0080
$330.16 MSRP: $463.87
You Save: $133.71 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Key & Cylinder Set-Lock; Cylinder & Keys, Ignition Lock Cylinder
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2018-2022 Hyundai Accent | DOHC - GDI, DOHC - MPI | Sedan - 4Door 5P
View related parts
Hyundai Accent Door Key Sub Set,Left
Part Number: 81970-H5A00
$195.34 MSRP: $274.45
You Save: $79.11 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Key Sub Set-Door,Lh; Cylinder & Keys, Lock Cylinder
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2018-2022 Hyundai Accent | DOHC - GDI, DOHC - MPI | Sedan - 4Door 5P
View related parts
Hyundai Accent Door Key Sub Set,Left
Part Number: 81970-1RB00
$49.33 MSRP: $68.71
You Save: $19.38 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Key Sub Set-Door,Lh; Cylinder & Keys
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2011-2014 Hyundai Accent | DOHC - GDI | Sedan - 4Door 5P, Sedan - 5Door 5P
View related parts
Hyundai Accent Lock Key & Cylinder Set
Part Number: 81905-1R252
$455.23 MSRP: $634.06
You Save: $178.83 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Key & Cylinder Set-Lock
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2011-2017 Hyundai Accent | DOHC - GDI | Sedan - 4Door 5P
View related parts
Hyundai Accent Lock Key & Cylinder Set
Part Number: 81905-H5030
$160.09 MSRP: $219.76
You Save: $59.67 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Key & Cylinder Set-Lock
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2018-2022 Hyundai Accent | DOHC - GDI, DOHC - MPI | Sedan - 4Door 5P
View related parts
Hyundai Accent Lock Key & Cylinder Set
Part Number: 81905-J0090
$217.86 MSRP: $300.84
You Save: $82.98 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Key & Cylinder Set-Lock
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2018-2022 Hyundai Accent | DOHC - GDI, DOHC - MPI | Sedan - 4Door 5P
View related parts
Hyundai Accent Lock Key & Cylinder Set
Part Number: 81905-1R301
$353.46 MSRP: $489.35
You Save: $135.89 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Key & Cylinder Set-Lock
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2011-2017 Hyundai Accent | DOHC - GDI | Sedan - 5Door 5P
View related parts
Hyundai Accent Lock Key & Cylinder Set
Part Number: 81905-25C10
$440.57 MSRP: $613.65
You Save: $173.08 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Key & Cylinder Set-Lock
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 1999-2006 Hyundai Accent | Low Grade, Middle Grade | 3 Door Sedan
View related parts
Hyundai Accent Lock Key & Cylinder Set
Part Number: 81905-1R300
$234.24 MSRP: $323.47
You Save: $89.23 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Key & Cylinder Set-Lock
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2011-2014 Hyundai Accent | DOHC - GDI | Sedan - 5Door 5P
View related parts
Hyundai Accent Lock Key & Cylinder Set
Part Number: 81905-22040
$338.25 MSRP: $467.10
You Save: $128.85 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Key & Cylinder Set-Lock
- Replaced by: 81905-22041
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 1994-1999 Hyundai Accent | High Grade, Low Grade, Middle Grade | 3 Door, 4 Door
View related parts
Hyundai Accent Lock Key & Cylinder Set
Part Number: 81905-1R041
$373.15 MSRP: $519.74
You Save: $146.59 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Key & Cylinder Set-Lock
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2011-2017 Hyundai Accent | DOHC - GDI | Sedan - 4Door 5P
View related parts
Hyundai Accent Door Key Sub Set,Right
Part Number: 81980-1RA00
$92.66 MSRP: $130.18
You Save: $37.52 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Key Sub Set-Door,RH; Lock Cylinder
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2011-2017 Hyundai Accent | DOHC - GDI | Sedan - 5Door 5P
View related parts
Hyundai Accent Lock Key & Cylinder Set
Part Number: 81905-1E040
$230.17 MSRP: $317.84
You Save: $87.67 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Key & Cylinder Set-Lock
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2005-2011 Hyundai Accent | High Grade | DOHC - MPI | 4 Door Sedan, Sedan - 4Door 5P
View related parts
Hyundai Accent Lock Key & Cylinder Set
Part Number: 81905-1E190
$230.17 MSRP: $317.84
You Save: $87.67 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Key & Cylinder Set-Lock
- Warranty: This genuine part is guaranteed by Hyundai's factory warranty.
Fits the following Vehicles:
- 2005-2011 Hyundai Accent | Middle Grade | DOHC - MPI | 3 Door Sedan, Sedan - 3Door 5P

| Page 1 of 4 |Next >

1-20 of 67 Results

Hyundai Accent Door Lock Cylinder

If you are looking for affordable high-quality OEM Hyundai Accent Door Lock Cylinder, then you have come to the prime place. Our website provides a large amount of genuine Hyundai Accent Door Lock Cylinder at unbeatable prices. All our parts come backed with the manufacturer's warranty.

Hyundai Accent Door Lock Cylinder Parts Questions & Experts Answers

Lock Key & Cylinder Set
81905-1E000
Q: How to remove and install the door latch, lock cylinder, inside handle, and outside door handle on Hyundai Accent?
A: First, strip the area by pulling the door trim panel and watershield, then the door window glass; then for Sierra 2006 and later, the rear channel. Then, it became physically possible to reach inside the door in some models to disconnect the door safety and the inside handle through the door service hole with the latch; if it was physically impossible with the latch on the later models, first, disconnect the rods connected to the inside handle mechanism, although the inside handle latch will be easily accessed later. Subsequently, unbolt the Door latch Retaining screws and pull out the Door latch, and the process of installation is the opposite of the process of detachment. For the lock cylinder, this is located on the outside door handle for the 1995 and later models, the lock cylinder rod should be pulled from its connection, and the retaining clip on the lock cylinder can be removed by using the pliers. As earlier expounded installation progresses in a polarity manner which is in this case the vice versa. Continuing with the interior handle, unscrew its retaining bolts and simply taking the handle out; the rods or cables that connect the handle mechanism must be disconnected although turning the handle assembly or the end of the cable 90 degrees may be required. Before tightening the screws, the handle assembly position should have the correct stroke travel when reinstalling. For the outside door handle you must first remove the lock rod and outside handle rod, then you will have to take out the screws in the nut and then you will have to slide the handle base and separate it. In addition to that, installation is done in a backward fashion.