Hyundai 95680-39100 Sensor-Abs Rear Wheel ,RH

You can Select Your Vehicle to check if 95680-39100 fits your vehicle.

The steps for removal and installation are as follows: 1. Loosen the wheel lug nuts, raise the vehicle, and support it securely on jackstands. Remove the wheel. 2. Ensure the ignition key is turned to the Off position. 3. Trace the wiring back from the sensor, detach all brackets and clips, and disconnect the electrical connector. 4. Remove the mounting bolt and carefully pull the sensor out from the knuckle or trailing arm. 5. Installation is the reverse of removal; tighten the mounting fastener securely. 6. Install the wheel and lug nuts, tightening them securely, then lower the vehicle and tighten the lug nuts to the specified torque.