Hyundai 21443-35500 Seal-Oil Rear

You can Select Your Vehicle to check if 21443-35500 fits your vehicle.

Be sure to use the torque specifications in this Part of Chapter 2.

This sleeve is pressed into place with a hammer and a block of wood and is commonly available at auto parts stores for various applications.

Lubricate the outside diameter of the seal and install it over the end of the crankshaft, ensuring the lip of the seal points toward the engine. Preferably, use a seal installation tool to press the new seal back into place. Note that there is a small oil drain in the separator that must be in the lowest position. If the proper seal installation tool is unavailable, use a large socket to carefully drive the new seal squarely into the seal bore and flush with the edge of the engine block.

Check the seal after installation to make sure the spring didn't pop out of place.