Hyundai 23124-2G600 Pulley-Damper

You can Select Your Vehicle to check if 23124-2G600 fits your vehicle.

Using a puller that bolts to the crankshaft hub, remove the crankshaft pulley from the crankshaft. Caution: Do not use a jaw-type puller-it will damage the pulley/damper assembly. Also, be sure to use the proper adapter to prevent damage to the end of the crankshaft.

To install the crankshaft pulley, slide the pulley onto the crankshaft as far as it will slide on. If you were able to remove the pulley by hand, install the bolt and washer and tighten the bolt to the torque. If a puller was required to remove the pulley, use a vibration damper installation tool to press the pulley onto the crankshaft, then install the bolt and washer and tighten the bolt to the torque. Note that the slot (keyway) in the hub must be aligned with the Woodruff key in the end of the crankshaft.