Hyundai 21510-2G001 Pan Assembly-Engine Oil

You can Select Your Vehicle to check if 21510-2G001 fits your vehicle.

Apply a 3/16 inch wide bead of RTV sealant to the mating surface of the oil pan, following the groove but going to the inside where the bolt holes are located. Install the pan within 15 minutes.

12. Remove the lower oil pan and the oil filter. 13. Disconnect the exhaust pipe from both exhaust manifolds (if necessary). 14. Disconnect the oxygen sensors and support the pipe temporarily. Unbolt the pipe at the rear and remove it from the vehicle. 15. Remove any other interfering components, ensuring enough clearance for oil pan removal. 16. Remove the lower baffle and the oil pump strainer/pickup on 2.5L and 2.7L engines. 17. Remove the upper oil pan fasteners, including those inside the pan and those securing it to the transaxle. 18. Tap the upper oil pan loose with a plastic hammer to remove it.