Hyundai 21510-25051 Pan Assembly-Engine Oil

You can Select Your Vehicle to check if 21510-25051 fits your vehicle.

19. Clean all sealing surfaces thoroughly with brake system cleaner to remove all traces of oil. 20. Inspect the oil pump pick-up/strainer assembly for cracks and blockages, clean it, and install it using a new gasket. 21. Apply a 3/16-inch wide bead of RTV sealant to the aluminum pan section, ensuring the pan is installed within five minutes. 22. Position the pan on the engine block and install the bolts, tightening them to the specified torque and following the tightening sequence. 23. The remainder of the installation is the reverse of removal. Allow the sealant to set for at least two hours before adding new oil and a new oil filter. 24. Run the engine and check for oil pressure and leaks.

Working from the center out, tighten the oil pan-to-engine block bolts to the specified torque.