Hyundai 87607-38100 Mirror & Holder Assembly-Outside Rear Vi

You can Select Your Vehicle to check if 87607-38100 fits your vehicle.

To remove the outside mirrors, you need to, firstly, remove the mirror trim panel, using a panel removing tool or any screwdriver with a blade covered with some tape. Subsequently, locate the electrical connector and remove it, followed by the removal of the screws/clip that holds up the mirror and finally, the mirror should be pulled out. For removal, reverse the process as touched on in the installation process of the program. The inside mirror, to remove adjust the outer trim piece and then using a plastic tool that pry's up the back of the plastic cover to disconnect the electrical connector if there is one. In some models, gently apply the point of the screwdriver with the taped cover to the mirror mount and the notch of the base of the mirror stalk to free the hairpin-type spring of the mirror stalk. In other models, unscrew the set-screw on the base of the mirror stalk by turning it counterclockwise. If a specific model does not apply to a set screw, replace the spring if it was taken off, align the lugs of the mirror stalk and the mount, and apply upward pressure to lock the mirror in position. If the mount plate to the windshield is undone, the adhesive kit can be bought in auto parts store and apply according to the direction.

Most electric side view mirrors use two motors to move the glass: one for up and down adjustments and one for left-right adjustments.