Hyundai 46710-2H000 Lever-Gear Shift

You can Select Your Vehicle to check if 46710-2H000 fits your vehicle.

Remove the center console. For 2000 and earlier models, two screws are to be removed and shift knob to be unbolted, apart from disconnecting the overdrive switch connector. Some connector plugs are labeled and include the shift lock cables from the lever assembly for the 2006 and earlier models, remove the plugs from the shifter. 2007 through the 2013 models: No clip and cable to be removed; pull wiring of the interlock mechanism and remove the clip for the cable coming from the front of the shifter bracket. For the 2014 and the later models, the cable ball socket end needs to be ejected with the help of a screwdriver. However what we need to bear in the mind is that the above changes commenced for 2011 and later; 1. In 2013 and prior BL models and 2014 and later 2.0L models, it is necessary to disconnect the electrical connectors of the Automatic Transmission Shift Levers. For vehicles that produce shift cable for the lever assembly for models prior to 2006, you need to disconnect the shift cable from the Automatic Transmission Shift Levers by pulling it up and then you need to unbolt the Automatic Transmission Shift Levers by using a through-bolt. Unscrew the Automatic Transmission Shift Levers bracket mounting bolts; you should now be able to retract the Automatic Transmission Shift Levers assembly from the car. Replacing it on the opposite way to removing it, and guarantee that all nuts are properly tightened.