Hyundai 92102-22050 Headlamp Assembly, Right

You can Select Your Vehicle to check if 92102-22050 fits your vehicle.

Pry up on the locking tab and disconnect the connector from the headlight bulb. Note: It may be difficult to disconnect the electrical connector depending on what is located directly behind the headlight. If so, wait until after unbolting the headlight housing to disconnect it.

For 1988 and 1989 bulb-type headlights, the upper adjusting screw moves the assembly right or left, and the lower one moves it up and down. For 1990 through 1992 models, the vertical adjuster is on top near the upper inner corner, and the horizontal adjuster is near the lower outer corner. For 1993 and 1994 models, both adjusters can be accessed through holes in the top of the headlight housing. For 1995 models, one adjustment hole is on top, and the other faces forward near the upper inner corner. For 1996 and later models, both adjustment holes are above the housing, with the inner hole for vertical adjustment and the outer hole for horizontal adjustment. However, horizontal adjustment is not recommended to be done at home for these models; it should be done by a dealer service department. For 2006 and later models, only vertical adjustment is possible.