Hyundai 86511-0W700 Front Bumper Cover

You can Select Your Vehicle to check if 86511-0W700 fits your vehicle.

Before removing it, you must engage the parking brake, lift the car and then place it on jack stands. Remove the wiring for the fog lights by pulling the connectors on the backside of the car, behind the bumpers. For 2010 and later models, slightly lift the tab located at the top of the headlight washer nozzle cover and pull it out, thereafter pulling the nozzle off and removing the cover and nozzle. Subsequently, locate at the top front of the bumper cover and either unbolt those fastening it, followed by raising the vehicle up once more and then unbolt the screws at the bottom of the bumper cover. Also, unscrew the four on each side that hold the bumper's cover with the wheel well liner and then pull off the bumper cover. Regarding the rear bumper, open the liftgate, pull up the weather strip, and there are screws at the upper part of the bumper cover. Lift the car using jack and place it on stands, then also remove eight lower screws of bumper cover, which is fixed to the frame and liners of the wheel well. Loosen the screws on both the sides that are located on the wheel wells of the car and then take off the bumper cover. Just as the removal, installation is also done in the opposite way for both bumpers on the car.