Hyundai 97250-3Q001-BLH Heater Control Assembly

You can Select Your Vehicle to check if 97250-3Q001-BLH fits your vehicle.

Use a plastic trim tool or a screwdriver wrapped with electrical tape to pry the assembly out and disconnect the wiring at the rear of the control panel for 2006 through 2010 models. For 2011 and later models, remove the center console upper trim panels from each side of the console. Remove the center trim panel mounting screws, then use a plastic trim tool or a screwdriver wrapped with electrical tape to pry out the center trim panel and vents. Remove the control assembly mounting screws, pull the assembly forward, and disconnect the electrical connectors.