Hyundai 94001-3D110 Cluster Assembly-Instrument(Mph)

You can Select Your Vehicle to check if 94001-3D110 fits your vehicle.

Remove the cluster mounting screws. To detach the instrument cluster, remove these mounting screws and pull the cluster out, disconnecting the wiring as you do so, and pull the instrument cluster towards the steering wheel.

The steps include: 1. Remove the front seats for easier access, if desired. 2. Remove the steering wheel (see Chapter 10). 3. Remove the multi-function switch (see Chapter 12). 4. Remove the dashboard trim panels (see Section 24) and the center floor console (see Section 23). 5. Remove the audio unit and air conditioning control panel at the center of the dashboard. 6. Remove the instrument cluster (see Chapter 12), then remove the glove box (see Section 24). 7. Disconnect the passenger side airbag electrical connector. 8. Remove the driver's knee bolster reinforcement structure. 9. Unscrew the bolts securing the steering column to the instrument panel and lower it (see Chapter 10). 10. Remove the front pillar trim (see Section 24). 11. Remove the kick panels and passenger side trim panel (see Section 24). 12. Disconnect a number of electrical connectors necessary for removing the instrument panel. 13. Remove all fasteners holding the instrument panel to the body. 14. Once all fasteners are removed, lift the panel and pull it away from the windshield to take it out through the door opening. Note: This is a two-person job.